Integrated Dishwasher repair

If your Hotpoint integrated dishwashers will not fill then please ensure that your water taps at the back of the Hotpoint integrated dishwashers are fully turned on and that the pipes are not kinked or squashed.

In order for a Hotpoint integrated dishwashers to fill it must first drain. See “my Hotpoint integrated dishwashers will not empty” below for advice on drainage plumbing.

If you need further assistance please call Hotpoint customer service on 0818 313 413

We recommend that you ensure that the waste hose has been correctly installed. If your Hotpoint integrated dishwashers empties into an under sink waste system please ensure that the blanked end of the waste spigot has been removed. Ensure the filter in the base of the dishwasher is clean and free from any blockages.

Check that the waste hose has not become trapped or kinked as this could also result in a failure to empty the waste water out of your Hotpoint integrated dishwashers.

If you need further assistance please call Hotpoint customer service on 0818 313 413

Cast iron pots and pans can start to rust where they’re cleaned in a dishwasher.

This can result in the rust spreading onto other items such as your cutlery or the tub of your dishwasher. We recommend you avoid washing cast iron pots and pans in your dishwasher.

If you need further assistance please call Hotpoint customer service on 0818 313 413

If you are finding at the end of a wash cycle that your dishes and glasses are appearing cloudy then this could be a possible calcium deposit. We also recommend use of our Dishwasher Salt, which improves washing performance and protects your dishwasher. Unique table form is easier to dose than ordinary dishwasher powder.

For more information on these products – click here or call our Hotpoint spare parts department on 0818 313 413

Issue: The LED lights on your dishwasher are displaying in the following sequence (please see below these error codes for your LED reference)

• LED 6: ON

• LED 7: OFF

• LED 8: OFF

• LED 9: OFF

Action: We recommend you call our customer service centre to book an engineer on 0818 313 413

Issue: The LED lights on your dishwasher are displaying in the following sequence (please see below these error codes for your LED reference)

• LED 6: ON

• LED 7: ON

• LED 8: OFF

• LED 9: OFF

Action: We recommend you check that the drain pipe and under sink plumbing for any blockages.

Action: If the fault continues please call our customer service centre to book an engineer on: 0818 313 413

Issue: The LED lights on your dishwasher are displaying in the following sequence (please see below these error codes for your LED reference)

• LED 6: OFF

• LED 7: ON

• LED 8: OFF

• LED 9: ON

Action: We recommend you call our customer service centre to book an engineer on 0818 313 413

Issue: The LED lights on your dishwasher are displaying in the following sequence (please see below these error codes for your LED reference)

• LED 6: OFF

• LED 7: OFF

• LED 8: ON

• LED 9: ON

Action: We recommend you call our customer service centre to book an engineer on 0818 313 413